Cold Sweat

• Added a new "acclimation" mechanic:
  • By spending time in hotter or colder climates, player can now adapt to more comfortably live in them
  • This causes their livable temperature range to be shifted upward or downward
  • The player can acclimate to live in climates up to 20°F/10°C hotter or colder than normal (configurable)
  • Complete acclimation takes about 15 minutes (also configurable)
• The rate at which the player is damaged by freezing/overheating is now dependent on how fast they are freezing/overheating
  • For example, if the player is in a 100°F/37°C area, they will take damage at the normal rate
  • If the player is in a 400°F/200°C area, they will take damage much faster
  • Wearing insulation slows down the rate of damage
• Lava now increases the player's temperature logarithmically (A.K.A. diminishing returns), as the amount of lava increases
  • This means one block of lava is more effective than before, but a whole pool of lava is slightly less effective
  • This should make it more fair as both a tool for warming up and a hazard to avoid
• Added new "Temperature Effects" sub-page to the config menu, which allows for individually tweaking the negative effects of freezing/overheating
  • This includes new settings for changing the blur and camera sway effects from overheating
• Water droplets caused by being wet now only show on the sides of the screen to reduce obstruction
• The body temperature readout (with a thermometer) now shows a gradient rising from the bottom as the player's temperature exceeds 100/-100

• Fixed crash when saving configs and Tough as Nails isn't loaded
• Fixed crash when saving the player's NBT data in some cases
• Fixed ConcurrentModificationException crash when managing cached capability data
• (1.21) Fixed armor items stacking to 64
• Fixed mount configs only working for living entities
• Fixed the thermal source spread blacklist not being used for determining if the hearth is under a roof
• Fixed how smokestacks and Create fluid pipes connect to thermal sources and each other
• Fixed the chameleon's head and tail disappearing after a long time of being loaded
• Fixed bug that caused attributes to sometimes throw errors when queried
• Fixed the player's wetness not being removed after using a trident
• Fixed rounding error on the body temperature readout

• Added "logarithmic" (boolean) field to block temp JSON and KubeJS configs
  • Makes a block deliver "diminishing returns" as more of them are present around the player

• Added new configs for the waterskin:
  • "Waterskin Hotbar Strength": The strength of the gradual cooling/heating of waterskins in the hotbar
  • "Waterskin Neutralize Speed": The speed at which waterskins' temperature will drain when in the hotbar
• Tweaked sewing table block and GUI textures
• Changed the sewing table recipe to be consistent with other workstations (like the smithing table)
• Moved the hearth's fluid intakes to coincide with its fuel inputs
• If the player is on fire and wet, they will now be extinguished and dried off
• Lava temperature is now TOML-based so it can be more easily changed

• (1.21) Fixed the hearth & other thermal sources not accepting fluid input
• (1.21) Fixed Thirst Was Taken compat module not loading if mod is present
• (1.21) Fixed incorrect attribute modifiers for the Create netherite diving set bonus
• (1.21) Fixed network lag when synchronizing insulated armor items
• (1.21) Fixed network error when fetching the tooltip for insulator items in some cases
• Fixed crash when checking the formatting for insulating armor items
• Fixed crash when using Iceberg 1.3.0+
• Fixed crash when cleaning up cached capabilities in some cases
• Fixed insulation items not working properly when applied to armor
• Fixed only being able to insulate half of the slots on armor
• Fixed incorrect logic when applying insulators that only take up one slot
• Fixed KubeJS insulator configs not compiling properly
• Fixed distortion effects triggering when the player has the Grace effect
• Fixed adaptive insulation tooltips displaying incorrectly
• Fixed tooltip metadata being modified incorrectly for armor items
• Fixed the shoulders on the chameleon scale chestplate being slightly too low

• All JSON configs that start with the word "default" will be loaded last, rather than just the ones named "default"
• Registry removal configs now accept a negatable list of NBT
• Insulating mount JSON now has an "immune_temp_modifiers" field, similar to insulator items
• The "cold_insulation" and "heat_insulation" fields in insulating mount JSON are now optional (defaulting to 0)

• The hearth's redstone inputs have been changed:
  • Heat is now emitted if the left or back side is powered
  • Cold is not emitted if the right or bottom side is powered
  • Tweaked the design of the redstone inputs to be more obvious
  • The redstone inputs are now hidden if "Automatic Hearth" is enabled in the configs
• Smokestacks can now be waterlogged
• Hearths can now be placed underwater
• Made thermal source air particle distribution more random instead of emanating from the center
• Added option to change the speed at which players naturally dry off
• Added support for some Tough as Nails items:
  • Wool armor: provides the same insulation as wool
  • Leaf armor: provides the same insulation as leather, but with no cold protection
  • Thermoregulator: now gives warmth & frigidness as a hearth would
• Adjusted default world temperature for the Twilight Forest and Aether dimensions

• (1.18) Fixed crash when loading KubeJS events
• Fixed crash when a hearth is running and Valkyrien Skies is not installed
• Fixed crash when using a hearth in a Valkyrien Skies ship
• Fixed memory leak due to capability caches not clearing expired entries
• Fixed memory leak due to destroyed/unloaded hearths continuing to listen for nearby block updates
• Fixed memory leak due to cached world temperature values not being cleared upon leaving the world
• Fixed food temperature being applied every tick if its duration is unset
• Fixed JSON configs with required_mods still attempting to parse when the mods are not present
• Fixed extraneous required field "factor" for adaptive insulation JSON
• Fixed KubeJS configs for biomes, dimensions, and structures not working
• Fixed thermal sources giving insulating effects in invalid locations if the player is standing on the same block as an output smokestack
• Fixed thermal sources emitting fuel particles from all nearby pipes and smokestacks, even if they are not connected
• Fixed input items being deleted when shift-clicking the output slot of the sewing table
• Fixed the chameleon's eye height being too high
• Fixed the chameleon's tongue not extending all the way when eating
• Fixed chameleon scale leggings not covering the bottom of the player's body
• Fixed water drip effects appearing when respawning after dying in water
• Fixed temperature visually carrying over briefly after respawning
• Fixed block temperature not being at full strength when standing right next to the block-
• Fixed incorrect/outdated effect recipes for JEED
• Fixed the chameleon's walk animation not playing when moving very slowly (like through soul sand)
• Fixed chameleons not properly remembering their temperature when loading back into a world
• Fixed ice not being mineable by tools with pickaxe-like abilities (multi-tools, Tetra tools, etc.)
• Fixed particles emitted by encased smokestacks getting stuck inside the block

• Insulation item configs now accept a list of insulation
  • This allows for adding multiple types (or slots) of insulation to a single item
  • Example: "insulation": [{"cold": 1, "hot": 0}, {"cold": 1, "hot": 0} (occupies 2 slots with lesser cold insulation)
  • Defining a single insulation is still allowed as to not break existing JSON
• Updated documentation for insulation-related TOML config settings
• Armor and curio insulation settings no longer support the "fill_slots" field
• Added new "world temp" requirement for JSON
  • Accepts decimal values
  • Also accepts some preset string values:
  • "freezing", "cold", "cool", "temperate", "warm", "hot", "burning"
  • Ordered from coldest to hottest. Based on the min/max temperature config settings
  • Now used in the min/max_temp fields in block temperature JSON
  • Added as "world temp bounds" to location requirement JSON:
  • Has min/max values, each of which is a world temp requirement
• Added "temperature" field to location requirement
• Some arguments for JSON configs now support a new type "Negatable List":
  • Defines a list of "requirements" and "exclusions" which must be met
  • Example: "entity":{"require":[{"entities":[#minecraft:skeletons]}],"exclude":[{"entities":[minecraft:wither_skeleton]}]}
  • Applies to all skeleton types except wither skeletons
  • Any block, entity, item, or location requirement can be negated in this way (except fields defined within other requirements)
  • The "old" format of these arguments will continue to be supported (i.e. "entity":{"entities":[#minecraft:skeletons]})
• The min/max temperature fields in block temperature JSON are now world temp requirements

• New armor set: Chameleon Scale
  • Crafted with chameleon molt in typical armor patterns
  • Visually adapts to the ambient temperature
  • Each armor piece provides maximum adaptive insulation
  • Cannot be insulated in the sewing table
  • Can be used as insulation for other items (similar to leather armor)
• The smokestack block can now be placed in all directions
  • This allows for creating "pipes" that transport air from the hearth/boiler/icebox
  • This is a built-in alternative to using Create's pipes, but those still work as well
  • A smokestack connected on more than one axis (like in corners) will become a "junction", which takes up a full block
  • Junctions do not allow air to pass around them- only through them via connected smokestacks
  • A smokestack can be right-clicked with cobblestone to create a junction, which is useful for venting air through walls
  • The smoke & steam emitted from the thermal sources will travel through the smokestack line and emit from the end(s)
• Smokestacks no longer require redstone to craft
• Tweaked how the insulation system works:
  • Each insulation slot now represents an item, rather than 2 insulation points
  • This enables more powerful insulation items to take up only one slot
  • Added custom tooltip graphic for "compound" insulation items
  • Added new parameter to insulator configs: "fill_slots"
  • This will make the insulator take up multiple slots as normal
• Updated compat for Create to 6.0.0
• (1.21) Fully Reimplemented Create and Thirst Was Taken support
• Entities caught on fire will now heat up the nearby area
  • You can also warm yourself up this way!
• Eating temperature-affecting foods now properly replaces the pre-existing effect for that item
  • i.e. eating a soul sprout will now reset the "coldness" timer if its effect is already active, rather than doing nothing
• ! Minecraft 1.21.1 is now the minimum supported version for 1.21. The "base" version is no longer compatible
  • NeoForge minimum version is now 21.1.60

• (1.19) Fixed the inside of structures having no temperature
• Fixed crash while ticking the icebox when Immersive Portals is installed
• Fixed adaptive insulating armors not adapting to the ambient temperature
• Fixed attribute modifiers added by insulation not being removed when the armor item is taken off

• TemperatureChangedEvent now fires every time an entity's temperature changes, instead of only when it is changed manually
• JSON and KubeJS configs with no defined targets (no listed items, entities, etc.) will now apply to everything
  • This is useful if your config should affect all entities that match given requirements/predicates
• ! The "data" field in item JSON configs has been renamed to "item" for consistency with other configs
• Added optional "affects_self" field to entity temperature JSON configs
  • This will cause the entity to be affected by its own temperature (defaults to "false")
• Added optional fields "count", "location", and "block_below" fields to entity spawn biome configs:
  • "count": The number of entities that can spawn in a group
  • "location": A location requirement that must be met for the entity to spawn
  • "block_below": Another location requirement, centered on the block below the entity
• Added optional "location" field to block temperature JSON
• Added new field to insulator configs: "fill_slots"
  • This will make the insulator take up multiple slots as normal (reverts the new "one item per slot" system)
  • This is "false" by default
• Added entity temperature, spawn biome, and insulating mount configs support to KubeJS
• (1.20-) Added new type-specific entity requirements (ported from 1.21):
  • (1.18+) "variant": Checks the entity's variant (cat color, axolotl color, etc.)
  • "fishing_hook": Checks if the fishing bobber entity is in open water (this is a Vanilla thing, IDK)
  • (1.18+) "lightning_bolt": Checks blocks set on fire and entities struck by the lightning
  • "piglin_neutral_armor": Checks if the entity is wearing armor that pacifies piglins
  • "player": Checks player-specific data (game mode, stats, advancements, etc.)
  • "raider": Checks pillager-specific data (part of an active raid, is the raid captain)
  • "slime": Checks the size of the slime
  • (1.18+) "snow_boots": Checks if the player is wearing boots that prevent falling through powder snow

• !! WARNING: This version of Cold Sweat is not confirmed to be stable. Serious bugs might occur!
• Added KubeJS support
  • Added events for adding insulators, block temps, biome temps, etc; as well as TempModifiers
  • Added several Cold-Sweat-related methods that can be accessed from the "coldsweat" binding
  • Added a few other events for specific Cold Sweat actions
• Ice freezing/thawing changes:
  • Ice now thaws according to Cold Sweat's temperature system
  • Ice now takes all temperature sources (nearby blocks, season, depth) into account when freezing/thawing
  • The rate at which water freezes is now affected by randomTickSpeed if "Custom Freezing Behavior" is enabled
• Added "drying items" config to item.toml, which allows players to dry off using certain items
  • Drying items can also be defined in JSON under item/drying_item/* with the following parameters:
  • "data": An item requirement, like in other configs
  • "entity": An entity requirement that the player must pass, like in other configs
  • "result": The item stack that the item will be turned into when used. If undefined, the item will be consumed
  • "sound": The sound to be played when the item is used. Defaults to a squishy sponge sound
• The Water Effects config setting now has 4 states:
  • OFF: Disables all water effects
  • Particles: Only water drip particles are shown
  • Overlay: Only the on-screen water overlay is shown
  • All: Both particles and overlay are shown
• item_settings/entity_settings/world_settings.toml have been renamed to item/entity/world.toml
  • Existing files will be automatically migrated
• Added "remove" config type, which allows for the removal of registered config settings
  • This includes TOML and JSON configs
  • Removals are handled after all of the config settings are parsed, but before they are committed to memory
• Added new config settings:
  • Insulation Strength
  • Check Sleep Conditions
  • New settings for the hearth/boiler/icebox
  • Maximum range and volume settings for each thermal source individually
  • Fuel consumption rate when applying warmth/frigidness
  • Toggle for Create backtank pressure loss in hot/cold environments
• The hearth now properly functions when part of a Valkyrien Skies ship
• Renamed the "Chill" effect to "Frigidness"
• Smokestack blocks now connect when stacked vertically
• Chameleons are now immune to projectiles when they are on a player's head
• Reorganized the "Cold Sweat: Insulators" tab & removed most of the wool colors except for white
  • More specifically, if an insulator contains a tag that has more than 6 items, only the first item in the tag will be displayed
• World temperature now decreases slightly when the weather is overcast (even if it doesn't rain in the biome)
  • This effect can be configured in world.toml
• Players now dry off exponentially faster in higher-temperature environments
• Insulation attributes with unmet requirements are now shown with red strikethrough, rather than being omitted
• Slightly improved the performance of the "blobs" shader that is applied when the player is overheating
• Waterskins can now take from any Forge fluid container that has 250mb of water, if the container supports it
• Piglins now accept the thermometer as a bartering item
• Goats can now be sheared by a dispenser

• Any JSON configs named "default" will now be loaded last
  • This allows for configs to have a default value that can be overridden by other mods/datapacks/configs
• Massive internal registry standardization and boilerplate reduction
  • Internal registries and configs are now much more standardized, with fewer points of failure
  • Codecs are used wherever possible for data serialization, rather than bespoke methods
• Cold Sweat configs that rely on dynamic registries now use Holders for their keys
  • This includes biomes, dimensions, structures, etc.
  • Any methods that previously accepted an "unwrapped" value now accept a Holder instead
• The temperature decrease due to altitude is now defined in JSON as part of the default temp_region file
  • This functionality was previously hard-coded, but can now be customized
• Added new functionality for inventory item temperatures ("carried items")
  • Now support giving attribute modifiers and temperature modifier resistances
  • Now support being in Curios slots
• Added "cold_sweat:extends_smokestack" block tag, which defines what blocks can be used to increase the height of a smokestack
• Temperature units are now supported for seasonal temperatures and block temperatures
  • Existing configs will be automatically updated to match the new format
• Added FetchSeasonsModsEvent, which allows mod developers to signal that Cold Sweat should load the appropriate seasonal configs
• Added InsulatorTabBuildEvent, which allows for simple modifications to the items in the insulator tab
• Added support for Just Enough Effect Descriptions

The following is the changelog for updates 2.3.9 - 2.3.12

• Ice freezing/thawing changes:
  • Ice now thaws according to Cold Sweat's temperature system
  • Ice now takes all temperature sources (nearby blocks, season, depth) into account when freezing/thawing
  • The rate at which water freezes is now affected by randomTickSpeed if "Custom Freezing Behavior" is enabled
• Added "drying items" config to item.toml, which allows players to dry off using certain items
  • Drying items can also be defined in JSON under item/drying_item/* with the following parameters:
  • "data": An item requirement, like in other configs
  • "entity": An entity requirement that the player must pass, like in other configs
  • "result": The item stack that the item will be turned into when used. If undefined, the item will be consumed
  • "sound": The sound to be played when the item is used. Defaults to a squishy sponge sound
• The Water Effects config setting now has 4 states:
  • OFF: Disables all water effects
  • Particles: Only water drip particles are shown
  • Overlay: Only the on-screen water overlay is shown
  • All: Both particles and overlay are shown
• item_settings/entity_settings/world_settings.toml have been renamed to item/entity/world.toml
  • Existing files will be automatically migrated
• Added "remove" config type, which allows for the removal of registered config settings
  • This includes TOML and JSON configs
  • Removals are handled after all of the config settings are parsed, but before they are committed to memory
• Added new config settings:
  • Insulation Strength
  • Check Sleep Conditions
  • New settings for the hearth/boiler/icebox
  • Maximum range and volume settings for each thermal source individually
  • Fuel consumption rate when applying warmth/frigidness
  • Toggle for Create backtank pressure loss in hot/cold environments
• The hearth now properly functions when part of a Valkyrien Skies ship
• Renamed the "Chill" effect to "Frigidness"
• Smokestack blocks now connect when stacked vertically
• Chameleons are now immune to projectiles when they are on a player's head
• Reorganized the "Cold Sweat: Insulators" tab & removed most of the wool colors except for white
  • More specifically, if an insulator contains a tag that has more than 6 items, only the first item in the tag will be displayed
• World temperature now decreases slightly when the weather is overcast (even if it doesn't rain in the biome)
  • This effect can be configured in world.toml
• Players now dry off exponentially faster in higher-temperature environments
• Insulation attributes with unmet requirements are now shown with red strikethrough, rather than being omitted
• Slightly improved the performance of the "blobs" shader that is applied when the player is overheating
• Waterskins can now take from any Forge fluid container that has 250mb of water, if the container supports it
• Piglins now accept the thermometer as a bartering item
• Goats can now be sheared by a dispenser

• Any JSON configs named "default" will now be loaded last
  • This allows for configs to have a default value that can be overridden by other mods/datapacks/configs
• Massive internal registry standardization and boilerplate reduction
  • Internal registries and configs are now much more standardized, with fewer points of failure
  • Codecs are used wherever possible for data serialization, rather than bespoke methods
• Cold Sweat configs that rely on dynamic registries now use Holders for their keys
  • This includes biomes, dimensions, structures, etc.
  • Any methods that previously accepted an "unwrapped" value now accept a Holder instead
• The temperature decrease due to altitude is now defined in JSON as part of the default temp_region file
  • This functionality was previously hard-coded, but can now be customized
• Added new functionality for inventory item temperatures ("carried items")
  • Now support giving attribute modifiers and temperature modifier resistances
  • Now support being in Curios slots
• Added "cold_sweat:extends_smokestack" block tag, which defines what blocks can be used to increase the height of a smokestack
• Temperature units are now supported for seasonal temperatures and block temperatures
  • Existing configs will be automatically updated to match the new format
• Added FetchSeasonsModsEvent, which allows mod developers to signal that Cold Sweat should load the appropriate seasonal configs
• Added InsulatorTabBuildEvent, which allows for simple modifications to the items in the insulator tab
• Added support for Just Enough Effect Descriptions